Samsung CSC Code Finder

Download It for FREE

How To Update Samsung Galaxy S9+ SM-G965F Firmware - All Methods

Saturday, 12 May 2018 08:57 TSAR3000

Galaxy S9 Plus Firmware Update

What is this Guide for:
This guide will show you the right and safe steps which you should follow to update and install a new official firmware version on the Samsung Galaxy S9+ SM-G965F.

We explained all the available methods which you can use to update your Galaxy device's software.

If you want to update your device without a computer, Then the OTA (Over-The-Air) method is your best choice, But for updating your device via Samsung Smart Switch software or Odin3 flasher, Then you need a computer to perform these two update methods.

The First Method - How To Update your Samsung Galaxy S9+ SM-G965F Firmware via OTA (Over-The-Air):

- If your device is rooted then do not use this method.
- You do not need any cable or computer to update your Galaxy S9+ via OTA.
- Make sure you have a good Wi-Fi connection to download the update.
- Check the charging level of your device, Must be more than 50%.
- From the Home screen tap on:
Settings > About device > Software update > Download updates manually.
- Tap OK > Start.
- When the restart message appears, tap OK.

The Second Method - How To Update your Samsung Galaxy S9+ SM-G965F Firmware Using Samsung Smart Switch:

- You need to download and install the Samsung Smart Switch software (How To Install Samsung Smart Switch).

- Double click on Smart Switch shortcut to run the software.

Smart Switch Shortcut

- Connect your Galaxy S9+ to your computer using its USB cable.

- If a pop-up appears on your phone, Then tap Allow.

- Now, Smart Switch will recognize your Galaxy device And check if there is any Software update available for it.

- To install the available update click on Update.

Smart Switch Firmware Update

- You will get some details about the new software before installing it on your device, Click on Continue.

Smart Switch Firmware Update Details

- In the new window, You will see some general warning and notes, Click on All confirmed.

Smart Switch Firmware Update Confirming

- Smart Switch will start downloading the new update on your computer, So be patient.

Smart Switch Firmware Download

- The software update will start after finishing the download process.

- Click on Yes to allow Smart Switch installing the software update on your Galaxy S9+ SM-G965F.

Smart Switch Firmware Installing

- Your Galaxy S9+ will reboot into Download Mode, And the install process starts.

- When the installing is finished, Your device will restart, And you can disconnect it.

- Done, Wait until your Galaxy S9+ is fully on, Then you can start using and customizing it the way you like.

The Third Method - How To Update your Samsung Galaxy S9+ SM-G965F Firmware Using Odin3 Flasher:

Collecting the needed files, Programs, And tools:

- The Samsung Galaxy S9+ SM-G965F USB Driver must be installed on your PC. You can install Samsung Smart Switch to get all the needed USB drivers.

- Download Odin3 flasher, And extract the zip file.

- Download and extract the wanted Official Firmware package for your Galaxy S9+ SM-G965F.


Important steps before starting the update process:

- Charge the device's battery to be at least at 90%.

- Type *#1234# Using the device's Keypad, And write down the installed firmware version.

- Backup any wanted data before updating your device's firmware (Use Samsung Smart Switch software to backup all your important data).

- Make sure that you know the Google account name and password.

- Any other Email accounts info, Samsung accounts info...etc.

Odin3 Settings:

- Run Odin3.exe program as Administrator.

- Click on Options tab.

- Auto Reboot, F.Reset Time options must be checked.

Odin3 Needed Options

- Do not check Re-Partition option, Unless you need to flash the PIT file.

Selecting the firmware files:

In this guide, We will use the Galaxy S9+ SM-G965F firmware version G965FXXU1ARD4 as an example. But you can use any wanted firmware version.

When you extracted the firmware package, You will notice that there are two CSC files, One file starts with CSC_Oxxx and the second starts with HOME_CSC_Oxxx.

If you are installing a firmware with the same country code (Or carrier) like your device already has, Then you can select the HOME_CSC_Oxx file in the CSC field, But in case you are installing a firmware with different country code (Or carrier) then you have to select CSC_Oxxx file instead.

The Odin3 program will become unresponding after selecting the big firmware's files like AP and CSC files, That is normal because the Odin3 program needs to check the MD5 value of the selected files, So be patient.

- Click on Pit tab, Then PIT button and select:
STAR2LTE_EUR_OPEN.pit (Only if you checked Re-Partition option and you have the PIT file).

- Click on BL button and select:

- Click on AP button and select:

- Click on CP button and select:

- Click on CSC button and select:




Galaxy S9 Plus Firmware Files

Installing the new firmware on the Samsung Galaxy S9+ SM-G965F:

- Turn Off the Galaxy S9+ SM-G965F, And wait for 10 seconds.

- Put the device into Download Mode:

Press and hold the Volume Down and Bixby buttons, Then press the Power button.

Galaxy S9 Plus Download Mode Keys

When the Warning screen appears, Release the buttons.

Download Warning Screen

Press Volume Up button to enter Odin Mode (Download Mode).

Firmware Download Screen

- Use the USB cable to connect your Galaxy S9+ to the computer.

- Wait until the computer detects the newly connected device completely.

- You should see the COM port number of your device at Odin3 window (0:[COMxx]).

Odin3 Galaxy Device COM port number

- Click on the Start button.

- Odin3 flasher will start installing the new firmware files on your Galaxy S9+ SM-G965F.

- The installing process will take several minutes, And when it is done, The Odin3 flasher will reboot your Galaxy device.

- Now, Look at Odin3 window, If you see PASS! Word at Odin3 program's window, That means the update was done successfully.

Odin3 Flashing Done

- Disconnect your Galaxy S9+.

- After the device is completely on, Type *#1234# Using the phone's Keypad.

- You should see the details of the newly installed firmware on screen.

- Good Job, You have updated your Samsung Galaxy S9+ SM-G965F firmware version.

- You can update your device software version without using any PIT file, So use the PIT file only if you need to fix your device partitions.

Last Updated on Saturday, 12 May 2018 09:38

You are here:   MainHow ToHow To Update Samsung Galaxy S9+ SM-G965F Firmware - All Methods
| + -
We have 221 guests online