Banner

Samsung CSC Code Finder

Download It for FREE

How To Update Samsung D880 Duos Firmware By NSpro Box

TSAR3000

How To Update Samsung D880 Duos Firmware By NSpro Box

 

 


Cable: you need to use NSpro C450 cable and take out the battery of the phone.


Firmware Update Process for Master Part:

  1. Run NSpro software program.
  2. From model list Select D880 and click on Next button.
  3. Click on Flash button.
  4. From Target drop down menu select Master.
  5. From Baudrate drop down menu select 921600 for faster process.
  6. From Mode drop down menu select Bin & TFS.
  7. Click on Browse button beside BIN File field and select D880xxxx_Master.cla
  8. Click on Browse button beside TFS File field and select D880xxxx_Master.tfs
  9. Click on Write button and then connect the phone to cable to start the process.
  10. Do not touch or remove the cable from the phone till all is done.


To Flash Slave part of Samsung D880 :

  1. From Target drop down menu select Slave.
  2. From Baudrate drop down menu select 921600 for faster process.
  3. From Mode drop down menu select Bin & TFS.
  4. Click on Browse button beside BIN File field and select D880xxxx_Slave.cla
  5. Click on Browse button beside TFS File field and select D880xxxx_Slave.tfs
  6. Click on Write button and then connect the phone to cable to start the process.
  7. Do not touch or remove the cable from the phone till all is done.


Notice: In case your phone has some software problems you can flash it with Repair Mode option Checked but you will lost the IMEI number of this phone so after flashing process finished you need to rewrite your phone IMEI again.


NSpro Box Softwares

Samsung D880 Duos Original Firmwares





You are here:   MainHow To: BoxesHow To Update Samsung D880 Duos Firmware By NSpro Box
| + -
We have 217 guests online