Galaxy M62 Archives - Tsar3000

How to Insert / Remove The SIM Card in The Samsung Galaxy M62

Tsar — Tue, 02 Mar 2021 19:31:56 +0000

You may be asking what is the Galaxy M62 SIM card size? Where is the SIM card slot located on the Galaxy M62? How to open the SIM tray on the Galaxy M62? How to open the SIM card tray without a removal tool? How to insert and remove a SIM card in the Galaxy M62?

The Galaxy M62 uses a Nano SIM card size. The SIM tray is located at the Left side of the phone. Insert the removal tool into the hole next to the SIM tray to eject it. then, Pull out the SIM tray and place the SIM card on it. Reinsert the SIM tray back into the phone and push it gently until it clicks.

This Galaxy M62 Easy Guide will answer your questions and show you how to install and remove the SIM card in the Samsung Galaxy M62 correctly.

The Samsung Galaxy M62 supports the Nano-SIM card size, So do not try to insert a SIM card with a different size, Or the SIM tray may be stuck and damage your phone.

The SIM card slot in the Samsung Galaxy M62 is located at the left side of the phone (Check the image below).

Samsung Galaxy M62 SIM card Slot Location

To open the SIM card tray in the Galaxy M62 you need to use the SIM removal tool (SIM eject tool), And in case you do not have it, You can use a simple paper clip (a small thin one) to open it.

How to Insert / Remove The Samsung Galaxy M62 SIM Card:

Time needed: 2 minutes

Follow these easy steps to install or remove the SIM card from your Galaxy M62.

Step 1:
Power Off your Galaxy M62.
Step 2:
Insert the SIM removal tool into the hole next to the SIM tray to loosen the tray, Push it gently until the SIM card tray pops out.
Step 3:
Now you can pull out the SIM card tray from the tray slot.
Step 4:
If you want to insert a SIM card in the SIM tray then place it correctly like the image below.
Step 5:
If you want to remove the existed SIM card then just lift the SIM card from the tray carefully.
Step 6:
Reinsert the SIM tray back into the tray slot (Pay attention to its direction) and push it gently until it clicks.
Step 7:
Power on your Galaxy M62 to verify that it has detected the newly installed SIM card.

The post How to Insert / Remove The SIM Card in The Samsung Galaxy M62 appeared first on Tsar3000.

How To Take A Screenshot On Samsung Galaxy M62

Tsar — Tue, 02 Mar 2021 18:16:12 +0000

Taking a screenshot on Samsung Galaxy M62 is effortless. Even You do not need to use or install any additional application on your Samsung phone. You can capture a screenshot on this Samsung smartphone via two methods. The first by using its hardware buttons. The second by Swiping the Screen (Palm Swipe to Capture).

To capture a screenshot in the Galaxy M62 Press and Release (At the same time) the Volume Down button + Side Key (Power button). Or Swipe the edge of your hand Horizontally to the right or left across the screen. The captured screenshot will be saved in Gallery App > Screenshots folder.

How To Take A Screenshot on Samsung Galaxy M62 using its Hardware Buttons:

Time needed: 2 minutes

Follow these steps to capture a screenshot in your Samsung Galaxy device:

Step 1:
Get the content you want to capture ready on your phone’s screen (webpage, Game score, WhatsApp chat…etc).
Step 2:
Press and Release the Volume Down button and the Side Key (Power) at the same time, And you’ll hear the camera shutter sound and see a short flashing animation on the phone’s screen.
Step 3:
The operating system of your phone saves the captured screenshot in the Screenshots folder. To see the screenshot photo go to Gallery App > Screenshots. Alternatively, you can use My Files app to open the Screenshots folder.
Step 4:
Once you find the screenshot photo, You can share it with your friends and family via any Social application, Email, Or send it to another device via a Bluetooth or WiFi connection. Alternatively, any sharing options available on your Samsung Galaxy device.

How To Take A Screenshot on Samsung Galaxy M62 by Swiping the Screen:

Step 1: First you have to check if the “Palm Swipe to Capture” feature is enabled on your Galaxy M62. Go to Settings > Advanced Features > Motions and Gestures, and make sure it is enabled.

Step 2: Get the content you want to capture ready on your phone’s screen (webpage, Game score, WhatsApp chat…etc).

Step 3: Place the side of the Palm of your hand on the edge of your phone’s screen.

Step 4: Swipe your hand Horizontally from this edge to the other one. However, Keep your palm’s side touching the screen. You’ll hear the camera shutter sound and see a short flashing animation on the phone’s screen.

Step 5: The operating system of your Samsung device saves the captured screenshot in the Screenshots folder. To see the screenshot photo go to Gallery App > Screenshots. Alternatively, you can use My Files app to open the Screenshots folder.

Step 6: Once you find the screenshot photo, You can share it with your friends and family via any Social application, Email, Or send it to another device via a Bluetooth or WiFi connection. Alternatively, any sharing options available on your Samsung Galaxy M62.

Notices:

The resolution of the captured screenshots is the same as your Samsung device screen resolution. The Samsung Galaxy M62 has FHD+ display with 1080 x 2400 Pixels resolution.
You can edit the screenshot photos the same way you do with any other photos and images.
You can not hide the Screenshots album (folder) because it is created by default like the Camera album.

The post How To Take A Screenshot On Samsung Galaxy M62 appeared first on Tsar3000.

How To Update The Samsung Galaxy M62 Software Version

Tsar — Tue, 02 Mar 2021 18:11:44 +0000

The Samsung Galaxy M62 comes with Android 11 out of the box, But Samsung keeps releasing new software updates for its Galaxy smartphones and tablets. So to keep your Galaxy M62 up to date, You need to learn how to update its software.

How do I Update My Galaxy M62 Software:

You can update the Samsung Galaxy M62 software version in three methods, Via FOTA (Over-The-Air), Using the Samsung Smart Switch application, And manually using Samsung Odin flasher.

Samsung Galaxy M62 software update via FOTA.
Samsung Galaxy M62 software update via Samsung Smart Switch.
Samsung Galaxy M62 software update via Samsung Odin.

How To Update Samsung Galaxy M62 Software via FOTA:

In this software update method, You do not need to use any external tools or programs. All you need to perform this update method is a good WiFi connection. The steps are elementary. All You have to do is reading the Samsung FOTA update guide to update your device via FOTA.

How To Update Samsung Galaxy M62 Software via Samsung Smart Switch:

This update method is a little bit different, As you need a computer to update your Samsung Galaxy Device. But it is also a simple process and does not require any experience. If you want to try this method, Then read the Smart Switch update guide and follow the steps one by one and you will make it.

How To Update Samsung Galaxy M62 Software via Samsung Odin:

Indeed I recommended this update method if the other two ones have failed. To update the Galaxy device via Samsung Odin flash tool, You need a computer, Samsung Firmware package, Samsung Odin flasher, Samsung USB drivers, And a USB cable.

In case you do not know how or where to get the Samsung firmware package, Then here is a complete guide on How to download Samsung firmwares.

Tips:

Make sure to download a newer firmware version from the one installed on your Samsung device.
Check your Samsung Galaxy M62 model number (It looks like SM-M625F, …). And download only the corresponding firmware files. You can check your device model number from Settings > About Device > Model Number.

Samsung Galaxy M62 Software Update Checklist:

Download and install the Samsung USB driver for mobile phones on your computer.
Download and extract the Samsung Odin flash tool (on your computer).
Extract the Samsung firmware package (on your computer).
Check the battery level of your Samsung device. Charge it if it is lower than 50%.
Make sure you know the Google account name and password. And any other Email accounts info, Samsung accounts info…etc.
Backup any wanted data before updating your device’s firmware (Use the Samsung Smart Switch software to backup all your relevant information).

Tip: Sometimes there are two CSC files inside the Samsung firmware package.
If you are installing firmware with the same country code (Or carrier) like your device already has, Then select the HOME_CSC_xxx file in the CSC field (This one will keep your apps and data). But in case you are installing firmware with a different country code (Or carrier) then select the CSC_xxx file instead.

Samsung Galaxy M62 Software Update Step by Step:

Follow These Steps to Update your Samsung Galaxy Device via Samsung Odin flash tool:

Step 1:
Run Samsung Odin flasher as Administrator.
Step 2:
Click on the Options tab and make sure the Auto Reboot, F.Reset Time options are checked.
Step 3:
Select the 4 firmware files:
– Click on the BL button and select the file starts with BL_xxxx.
– Click on the AP button and select the file starts with AP_xxxx.
– Click on the CP button and select the file starts with CP_xxxx.
– Click on the CSC button and select the file starts with HOME_CSC_xxx or CSC_xxx.
Step 4:
Turn Off your Galaxy device, And wait for 10 seconds.
Step 5:
Connect the USB cable to the computer. It is better to use the original USB cable you got with your Samsung device.
Step 6:
Put the device into the Download Mode:
– Press and hold the Volume Up + Volume Down buttons. Then, Insert the USB cable (Must be connected to the PC).
– When the Warning screen appears, Release the buttons.
– Press the Volume Up button to enter Odin Mode (Download Mode).
Step 7:
Check if the computer detects the newly connected device completely, You will see the COM port number of your device at the Odin window (0:[COMxx]).
Step 8:
Click on the Start button. Odin flasher will start installing the new firmware files on your Galaxy M62, And reboot it when finishing.
Step 9:
Wait until you see PASS! Word at Odin program’s window. That means the update was successful. You can disconnect your Galaxy device from the computer.
Step 10:
After your Galaxy device is entirely on, Select your preferred device language. Then, Follow the on-screen instructions to proceed with the initial setup.

Did you use this guide to update your Samsung Galaxy M62?

Which method did you use?

Share your experience in the comments below.

The post How To Update The Samsung Galaxy M62 Software Version appeared first on Tsar3000.

How To Factory Reset The Samsung Galaxy M62

Tsar — Tue, 02 Mar 2021 18:07:42 +0000

This easy step by step tutorial will help you to factory reset your Samsung Galaxy M62, wipe all the saved data, and restore it to the factory default settings. Also, You will learn how to Soft Reset the Galaxy M62 and Wipe the Cache Partition.

To Factory Reset (Hard Reset) the Samsung Galaxy M62 Go to Settings > General Management > Reset > Factory Data Reset. Or Turn it off then Press and Hold Volume Up + Power buttons, And release them when Samsung Logo shows up. Then, Select the Wipe Data/Factory Reset option.

We listed both methods below in detail. Also, you can learn how to wipe the cache partition, and soft reset your Samsung phone.

Before resetting your phone, read our guide on how to prepare your Samsung Galaxy device for a factory reset.

If You have already reset your Galaxy M62 and can’t bypass the Factory Reset Protection (FRP Lock), Then read our guide on How to Unlock Samsung FRP Lock Here.

How To Factory Reset the Samsung Galaxy M62 from Settings Menu:

Step 1: Tap Settings icon from the home screen.

Step 2: Tap on General management.

Step 3: Tap Reset.

Step 4: Tap Factory Data Reset:
At this point, the Android OS will tell you that all data will be erased from your phone. Including your Google account, System and app data, Settings, Downloaded app, Music, Pictures, And all other user data, So make sure to back up anything you need before moving to the next steps.

Step 5: Tap Reset:
Once again the phone will remind you, That all your personal information and downloaded apps will be erased and can’t be recovered.

Step 6: If the device asks for any password, PIN code, Or pattern, Then enter it and tap on Continue.

Step 7: Tap Delete all. Then, Wait for the Factory data reset process to be completed. The device will reboot.

Step 8: Done, Now when your Galaxy M62 is fully on, Select your preferred device language, And follow the on-screen instructions to proceed with the initial setup.

How To Factory Reset the Samsung Galaxy M62 from Recovery Menu:

Time needed: 5 minutes

Follow these steps to reset your device from the Android recovery menu:

Step 1:
Ensure your Samsung phone is powered off, If not, Then turn it off (Press and hold the Side key + the Volume Down button. When the Power Menu appears tap on Power off).
Step 2:
Press and hold the Volume Up button, Then press and hold the Side key too.
Step 3:
Wait until the Samsung logo appears, Then release all buttons. After a few seconds, you will see an Android Recovery menu on the screen with many options.
Step 4:
Use the Volume Down button to select Wipe Data/Factory Reset option.
Step 5:
Use the Power button to confirm your selection.
Step 6:
Now use the Volume Down button again to select “Factory Data Reset“.
Step 7:
Confirm it by pressing the Power button (Side Key), And Wait for the Factory reset process to be completed.
Step 8:
The Android Recovery menu will return, and the Reboot System Now option is highlighted. Press the Power button (Side Key) to reboot your phone.
Step 9:
When your Samsung phone is fully on, Select your preferred device language, And follow the on-screen instructions to proceed with the initial setup.

How To Wipe Cache Partition on the Samsung Galaxy M62:

Clearing the cache partition of your Galaxy device will not delete your data (Contacts, SMS, Photos, Videos,… Etc). It will remove the temporary system data which is useful to make the system run more smoothly. It is recommended to wipe the cache partition after installing a new system update.

To wipe the cache partition follow the same steps like (Factory Reset Samsung Galaxy M62 from Recovery Menu). But instead of selecting the Wipe Data/Factory Reset option, You should choose the Wipe Cache Partition option.

How To Soft Reset the Samsung Galaxy M62:

The Soft Reset means turning your device off and on again. Like Wipe Cache Partition, This operation will not delete your data.

If your Galaxy M62 screen is frozen or unresponsive, Then, This operation may fix it:

Ensure your device battery has more than 5% of power. If no, Then charge your device first.
Press and hold the Volume Down button + the Side key (Power button).
Keep holding the two buttons until the device vibrates, and the Samsung logo appears on the screen. Then release the both buttons.
Wait for the device to be fully on and check if your problem still exists, Or you have fixed it.

Why do I need to factory reset my Samsung phone or Tablet?

You may need to factory reset your phone or tablet for many reasons:
– Before selling your phone or give it to someone else to use it (to delete your stored personal data, Like Photos, Contacts, SMS).
– To remove the forgotten pattern lock or password.
– To Fix the frozen screen problem, Or Solving hang and unresponsive issues.
– To speed up your Samsung device and make it run like its first use.
– To solve some software or applications errors.
– To clean your phone or tablet and delete the malware or viruses.

The post How To Factory Reset The Samsung Galaxy M62 appeared first on Tsar3000.

Samsung Galaxy M62 User Manual / User Guide (PDF)

Tsar — Tue, 02 Mar 2021 10:52:35 +0000

As the Samsung Galaxy M62 has a lot of new features and functions, So it is so helpful to have a complete User Manual (user guide) that can guide you to discover all those interesting features and functions. And show you how to use and Setup the Galaxy M62.

Read more about the Samsung Galaxy M62 Specifications and Features in our Samsung Devices Database.

What is inside the Samsung Galaxy M62 User Manual?

Here is a simple list of what you can learn from this user manual:

The Samsung Galaxy M62 overheating situations and solutions, And Precautions for device overheating.
The Galaxy M62 layout and functions (Hardware buttons, Soft buttons, Speaker, Microphone, SIM card / Memory card tray, …etc.).
Charging the Galaxy M62 battery and Reducing the battery consumption.
How to use the Fast charging feature in the Galaxy M62.
Install and remove the SIM and Memory cards in the Galaxy M62, And format the memory card.
Turn the Galaxy M62 On and Off, And force restart the phone.
All you need to know about the Samsung account (Creating a Samsung account, Finding your ID, And resetting your password, Removing your Samsung account.).
Transfer your data from your old phone to the Galaxy M62.
Hide the navigation bar.
Display the screen in landscape mode.
Change the screen lock method.
Capture a screenshot on your Galaxy M62.
Change the language on the Galaxy M62 and its keyboard’s language.
Install and uninstall apps on the Galaxy M62, From the Galaxy Store and Google Play Store.
Block phone numbers.
Block text messages.
Activate and Deactivate the Secret mode.
How to use the Galaxy M62’s Camera and customize its settings and shooting modes.
Use the Multi Window feature and split-screen view.
What is the Game Launcher and Game Booster, And how to use them.
Connect the phone to Wi-Fi networks.
Change the calls ringtone.
Adjust the brightness of your phone’s display.
Change the wallpaper and themes on Galaxy M62.
Troubleshoot the Samsung Galaxy M62.
And Much More…

Where to Download the Samsung Galaxy M62 User Manual?

Just Click on the Download button below to download the official Samsung user manual for the Samsung Galaxy M62 (in PDF format) and start exploring your device.

Download Samsung Galaxy M62 User Manual (English) 3.29 MB

The post Samsung Galaxy M62 User Manual / User Guide (PDF) appeared first on Tsar3000.

Download Samsung Galaxy M62 User Manual (English)

Tsar — Tue, 02 Mar 2021 10:46:06 +0000

The post Download Samsung Galaxy M62 User Manual (English) appeared first on Tsar3000.