In this Guide, You will learn how to update Samsung Galaxy Grand Prime Duos SM-G530H manually by using the Odin3 flash tool and Samsung Stock Firmware files.

Samsung Galaxy Grand Prime Duos SM-G530H Update Check List:

1- The Software Update process will wipe all your data, So backup all the wanted data (Contacts, SMS, Photos, Videos,… Etc).

2- Make sure that you know all the emails and passwords you use on this device.

3- Ensure your Samsung Galaxy device has enough charge level (50% at least).

4- Download Odin flasher and extract it to a known location on your computer.

5- Download the suitable Samsung Firmware package for your Galaxy Grand Prime Duos.

6- Extract the Downloaded Samsung Firmware package to a known location on your computer.

7- Download and Install Samsung USB Driver for Mobile phones.

Update Samsung Galaxy Grand Prime Duos SM-G530H Software (Step by Step):

1- Run Odin3.exe program as Administrator.

2- Make sure these options are checked: Auto Reboot, F.Reset Time.

3- If you want to flash PIT file then check Re-Partition option. Otherwise leave it unchecked.

4- Click on PIT button and select: FORTUNA3G_EUR_OPEN.pit (Only if you checked Re-Partition option).

5- Click on BL button and select: BL_G530HXXU1ANI8_132828_REV00_user_low_ship_MULTI_CERT.tar.md5

6- Click on AP button and select: AP_G530HXXU1ANI8_132828_REV00_user_low_ship_MULTI_CERT.tar.md5

7- Click on CP button and select: CP_G530HXXU1ANI8_132828_REV00_user_low_ship_MULTI_CERT.tar.md5

8- Click on CSC button and select: CSC_SER_G530HSER1ANI8_132828_REV00_user_low_ship_MULTI_CERT.tar.md5

9- Turn Off your Galaxy Grand Prime and put it into Download Mode ( Press Volume Down + Home then Power button).

10- After you see the Warning message press the Volume Up button.

11- Use the USB cable to connect it to the computer.

12- Wait until the computer detects the newly connected device completely and installs the needed drivers for it.

13- You should see the COM port number of your device at Odin3 window (0:[COMxx]).

14- Click on the Start button to let Odin3 flasher install the new firmware files on your Galaxy Grand Prime.

15- The installing process will take several minutes, And when it is done, The Odin3 flasher will reboot your Galaxy device.

16- Look at Odin3 window, If you see PASS! Word at Odin3 program’s window, That means the update was done successfully.

17- Disconnect the USB cable.

18- When your Galaxy Grand Prime is fully on select your preferred device language and follow the on-screen instructions to proceed with the initial setup.

19- Done, You have updated the software version of your Samsung Galaxy Grand Prime Duos SM-G530H.

Notice: In case you extracted the Samsung Firmware Package and you got one big file only, Then select it as AP file.

The post How To Update Samsung Galaxy Grand Prime Duos SM-G530H Software appeared first on Tsar3000.