• Update your Samsung Galaxy J7 Prime SM-J727T and SM-J727T1 via FOTA, Samsung Smart Switch software, And manually using the Samsung Odin flasher.
• How and Where to Download Samsung Firmware Files.
• Prepare your Galaxy device for the software update.
• Select the 4 firmware files in Samsung Odin flash tool.
• Use Samsung Odin flasher.
• Put your Galaxy device into Download Mode (Also known as Samsung Odin Mode).
• Install the latest software (Firmware) update on your Galaxy device.

Samsung Galaxy J7 Prime SM-J727T Software Update Methods:

Fortunately, there is more than one method to update your Samsung Galaxy device. So if one of these methods does not work for you, You can try another one.

There are three methods to update the software version of the Galaxy J7 Prime SM-J727T:

• Samsung Galaxy J7 Prime software update via FOTA.
• Samsung Galaxy J7 Prime software update via Samsung Smart Switch.
• Samsung Galaxy J7 Prime software update via Samsung Odin.

How To Update Samsung Galaxy J7 Prime SM-J727T software via FOTA:

In this software update method, You do not need to use any external tools or programs. All you need to perform this update method is a good WiFi connection. The steps are elementary. All You have to do is reading the Samsung FOTA update guide to update your device via FOTA.

How To Update Samsung Galaxy J7 Prime SM-J727T software via Samsung Smart Switch:

This update method is a little bit different, As you need a computer to update your Samsung Galaxy Device. But it is also a simple process and does not require any experience. If you want to try this method, Then read the Smart Switch update guide and follow the steps one by one and you will make it.

How To Update Samsung Galaxy J7 Prime SM-J727T software via Samsung Odin:

Indeed I recommended this update method if the other two ones have failed. To update the Galaxy device via Samsung Odin flash tool, You need a computer, Samsung Firmware package, Samsung Odin flasher, Samsung USB drivers, And a USB cable.

In case you do not know how or where to get the Samsung firmware package, Then here is a complete guide on How to download Samsung firmwares.

Tips:

• Make sure to download a newer firmware version from the one installed on your Samsung device.
• Check your Samsung Galaxy J7 Prime model number (It looks like SM-J727T, SM-J727T1). And download only the corresponding firmware files. You can check your device model number from Settings > About Device > Model Number.

Samsung Galaxy J7 Prime Software Update Checklist:

• Download and install the Samsung USB driver for mobile phones on your computer.
• Download and extract the Samsung Odin flash tool (on your computer).
• Extract the Samsung firmware package (on your computer).
• Check the battery level of your Samsung device. Charge it if it is lower than 50%.
• Make sure you know the Google account name and password. And any other Email accounts info, Samsung accounts info…etc.
• Backup any wanted data before updating your device’s firmware (Use the Samsung Smart Switch software to backup all your relevant information).

Tip: Sometimes there are two CSC files inside the Samsung firmware package.
If you are installing firmware with the same country code (Or carrier) like your device already has, Then select the HOME_CSC_xxx file in the CSC field (This one will keep your apps and data). But in case you are installing firmware with a different country code (Or carrier) then select the CSC_xxx file instead.

Samsung Galaxy J7 Prime SM-J727T Software Update Step by Step:

1- Run Samsung Odin flasher as Administrator.

2- Click on the Options tab.

3- Make sure the Auto Reboot, F.Reset Time options are checked.

4- Select the 4 firmware files:

• Click on the BL button and select the file starts with BL_xxxx.
• Click on the AP button and select the file starts with AP_xxxx.
• Click on the CP button and select the file starts with CP_xxxx.
• Click on the CSC button and select the file starts with HOME_CSC_xxx or CSC_xxx.

5- Turn Off your Galaxy device, And wait for 10 seconds.

6- Connect the USB cable to the computer. It is better to use the original USB cable you got with your Samsung device.

7- Put the device into the Download Mode:

• Press and hold the Home + Volume Down buttons. Then, Connect the USB cable to your phone.
• When the Warning screen appears, Release the buttons.
• Press the Volume Up button to enter Odin Mode (Download Mode).

8- When the computer detects the newly connected device completely, You will see the COM port number of your device at the Odin window (0:[COMxx]).

9- Click on the Start button. Odin flasher will start installing the new firmware files on your Galaxy J7 Prime, And reboot it when finishing.

10- Wait until you see PASS! Word at Odin program’s window. That means the update was successful. You can disconnect your Galaxy device from the computer.

11- After your Galaxy device is entirely on, Select your preferred device language. Then, Follow the on-screen instructions to proceed with the initial setup.

12- Done, You have updated the software version of your Samsung Galaxy J7 Prime SM-J727T.

Did you use this guide to update your Samsung Galaxy J7 Prime?

Which method did you use?

Share your experience in the comments below.

The post How To Update Samsung Galaxy J7 Prime SM-J727T Software appeared first on Tsar3000.

How To Take A Screenshot on Samsung Galaxy J7 Prime SM-J727T using its Hardware Keys:

1- Get the content you want to capture ready on your phone’s screen (webpage, Game score, WhatsApp chat…etc).

2- Press and hold the Volume Down and Power Keys at the same time for about 2 seconds. You’ll hear the camera shutter sound and see a short flashing animation on the phone’s screen.

3- The operating system of your phone saves the captured screenshot in the Screenshots folder. To see the screenshot photo go to Gallery App > Screenshots. Alternatively, you can use My Files app to open the Screenshots folder.

4- Once you find the screenshot photo, You can share it with your friends and family via any Social application, Email, Or send it to another device via a Bluetooth or WiFi connection. Alternatively, any sharing options available on your Samsung Galaxy device.

Notices:

• The resolution of the captured screenshots is the same as your Samsung device screen resolution. The Samsung Galaxy J7 Prime SM-J727T and SM-J727T1 has HD display with 720 x 1280 Pixels resolution.
• You can edit the screenshot photos the same way you do with any other photos and images.
• You can not hide the Screenshots album (folder) because it is created by default like the Camera album.

The post How To Take A Screenshot on Galaxy J7 Prime SM-J727T appeared first on Tsar3000.

There are two factory reset methods, The first one (Factory Reset Samsung Galaxy J7 Prime from Settings Menu) you can use it when your Galaxy device is powered on, When the second one (Factory Reset Samsung Galaxy J7 Prime from Recovery Menu) is used when your phone is Powered off.

There are two more things related to the Galaxy J7 Prime reset process. The first is How To Wipe Cache Partition on the Samsung Galaxy J7 Prime. And the second is How To Soft Reset the Samsung Galaxy J7 Prime. By reading this guide you will solve a lot of the software problems and errors of the Galaxy J7 Prime SM-J727T.

Samsung Galaxy J7 Prime SM-J727T Factory Reset Checklist:

1- This process restores the Android platform to its original state and wipe all your data, So backup all the wanted data (Contacts, SMS, Photos, Videos,… Etc). You can use Samsung Smart Switch software to backup all your important data.

2- Make sure that you know the Google account name and password.

3- Any other Email accounts info.

4- Samsung accounts info.

5- Any other log-in info and settings you used on your Samsung Galaxy J7 Prime.

6- Ensure your Samsung Galaxy device has enough charge level.

How To Factory Reset Samsung Galaxy J7 Prime SM-J727T from Settings Menu:

1- Tap Settings icon from the home screen.

2- Tap General management.

3- Tap Reset.

4- Tap Factory Data Reset:
At this point the Android OS will tell you that all data will be erased from your phone. Including your Google account, System and app data, Settings, Downloaded app, Music, Pictures. And all other user data, So make sure to backup anything you need before moving to next steps.

5- Tap Reset:
Once again the phone will remind you, That all your personal information and downloaded apps will be erased and can’t be recovered.

6- If any password,PIN code, Or pattern is requested, Then enter it and tap Continue.

7- Tap Delete all.

8- Wait for the Factory data reset process to be completed, And the device will reboot.

9- Done, Now when your Galaxy J7 Prime is fully on, Select your preferred device language, And follow the on-screen instructions to proceed the initial setup.

How To Factory Reset Samsung Galaxy J7 Prime SM-J727T from Recovery Menu:

1 – Ensure your Samsung Galaxy J7 Prime is powered off, If not, Then turn it off (Press and hold the Power key, and then tap Power off).

2 – Press and hold the Volume Up and Home buttons.

3 – Keep the above two buttons pressed then press and hold the Power button too.

4 – Wait until the Android logo appears, Then release all buttons.

5 – An exclamation mark and Android Logo will appears on your phone’s screen.

6 – If the device stays on this screen, You can try to tap on the screen. Or press the Power button first, Then press the Volume Up button to enter into the Recovery Menu.

7 – After a few seconds, you will see an Android Recovery menu on the screen with many options.

8 – Use the Volume Down button to select Wipe Data/Factory Reset option.

9 – Use the Power button to confirm your selection.

10 – Now use the Volume Down button again to select “Yes“

11 – Confirm it by pressing the Power button.

12 – Wait for the Factory reset process to be completed.

13 – The Android Recovery menu will return and Reboot System Now option is highlighted.

14 – Press the Power button to reboot your Samsung Galaxy J7 Prime.

15 – Done, Congratulations. You have restored your Samsung Galaxy J7 Prime SM-J727T to its original factory settings.

– How To Wipe Cache Partition on the Samsung Galaxy J7 Prime SM-J727T:

Clearing the cache partition of your Galaxy J7 Prime will not delete your personal data (Contacts, SMS, Photos, Videos,… Etc). It will delete the temporary system data which is useful to make the system run more smoothly. It is recommended to wipe the cache partition after installing a new system update.

To wipe the cache partition follow the same steps like (Factory Reset the Samsung Galaxy J7 Prime from Recovery Menu). But instead of selecting the Wipe Data/Factory Reset option, You should select the Wipe Cache Partition option.

– How To Soft Reset the Samsung Galaxy J7 Prime SM-J727T:

The Soft Reset means turning your device off and on again. Like Wipe Cache Partition, This operation will not delete your personal data.

If your Galaxy J7 Prime screen is frozen or unresponsive, Then, This operation may fix it:

1- Ensure your device battery has more than 5% of power. If no, Then charge your device first.

2- Press and hold the Volume Down button + the Power button.

3- Keep holding the two buttons until the device vibrate and the Samsung logo appears on the screen. Then release the buttons.

4- Wait for the device to be fully on and check if your problem is fixed.

The post How To Factory Reset Samsung Galaxy J7 Prime SM-J727T appeared first on Tsar3000.

No problem you can use it with any SIM card worldwide if you Unlock it, And this guide will show you how to SIM unlock your Galaxy J7 Prime using the T-Mobile Device Unlock application.

Samsung Galaxy J7 Prime SM-J727T T-Mobile IMEI Status Check:

1- Make sure your Galaxy J7 Prime SM-J727T T-Mobile is 100% Clean. That means you have to check if the device is reported as Lost, Stolen or any other problems. You can use the official T-Mobile IMEI check service (T-Mobile IMEI Status Check Link).

2- To get the IMEI number of your Samsung Galaxy J7 Prime enter this code *#06# using the phone’s keypad.

3- Now enter the IMEI number (15 digits) and click on Submit.

4- When the Security Verification window appears, Enter the letters and numbers you see into the text box, Then click on Validate.

5- If your Galaxy J7 Prime is Clean you will get the below result, And you can Unlock it:

6- Otherwise you will see the below result, And you can not Unlock it:

Samsung Galaxy J7 Prime SM-J727T T-Mobile Software Check:

1- Make sure the phone is not rooted.

2- Make sure the IMEI number is not modified or changed.

3- Make sure your phone is running the original T-Mobile stock ROM. No custom Firmware like CyanogenMod, or Unbranded ROM is installed.

4- Check if your phone has the latest software version.

5- With your phone connected to the internet, From phone’s Home screen Tap on Apps icon > T-Mobile folder > Device Unlock application.

6- Tap Continue.

7- Tap on Permanent Unlock.

8- If your phone shows: “Unlock Failed: This mobile wireless device is not eligible for unlock. For Device Unlock eligibility details, please go online or contact Customer Care.” then you can order the SIM Unlock service.

Buying The Samsung Galaxy J7 Prime SM-J727T T-Mobile SIM Unlock Service:

1- Use only a trusted SIM Unlock service. We recommended this Galaxy J7 Prime SM-J727T T-Mobile SIM Unlock service.

2- After placing your order for the SIM Unlock service, You have to wait until you get an email from the service provider informing you that your Galaxy J7 Prime T-Mobile is Unlocked.

Unlock Samsung Galaxy J7 Prime SM-J727T T-Mobile:

1- Put the original T-Mobile USA SIM card inside your phone.

2- Make sure your phone is connected to the Internet. If your 3G/4G/LTE data connection is not good and stable, Then use a good WiFi connection instead.

3- From phone’s Home screen tap on Apps icon > T-Mobile folder > Device Unlock application.

4- Tap Continue.

5- The Application will connect to T-Mobile server, It may take few seconds.

6- The Device Unlock App will give you two options. Tap on Permanent Unlock option.

7- The Application will reconnect to the server to Unlock your Galaxy J7 Prime.

8- When the Unlock process is done, You will see a message informing you that your device is Permanently Unlocked. Tap on Restart Now.

9- Your Galaxy J7 Prime SM-J727T T-Mobile will restart. Congratulations, Your phone is SIM Unlocked and you can you any other SIM card from any other Mobile operator worldwide.

Galaxy J7 Prime SM-J727T T-Mobile Device Unlock App Error Messages and Solutions:

Error Message: Device not recognized by your service provider. Please call customer care.
– Solution 1: Make sure your phone is not rooted. If it is rooted then install an Original T-Mobile Stock ROM.
– Solution 2: Check if your phone has the latest T-Mobile software version.

Error Message: Data corrupted during transfer. Please try again. Error during data transfer. Please try again.
– Solution: Use a good and stable Internet connection. Try to restart the phone and try again.

Error Message: Server not responding. Please try again later.
– Solution: Use a good and stable Internet connection. You can try again after a while or at a different time of the day.

Error Message: Failure in processing the request. Please reboot device and try again.
– Solution: Check if your phone has enough memory, Then restart it and try again.

Error Message: Unlock Failed: Unlock Approved: Mobile Device is permanently unlocked
– Solution 1: Check if your phone has the latest T-Mobile software version.
– Solution 2: Factory Reset your phone and try again.

Error Message: No internet connection available. Please try again when internet connection is available.
– Solution: Make sure your phone is connected to the Internet.

Error Message: Unlock Failed: System maintenance error, try again later.
– Solution: Try at another time of the day.

Error Message: Failure in applying the unlock settings. Please try again.
– Solution: Original T-Mobile SIM card must be used. Check your Internet connection.

The post How To Unlock Samsung Galaxy J7 Prime SM-J727T T-Mobile USA appeared first on Tsar3000.