• Update your Samsung Galaxy Tab A 8.4 (2020) via FOTA, Samsung Smart Switch software, And manually using the Samsung Odin flasher.
• How and Where to Download Samsung Firmware Files.
• Prepare your Galaxy tablet for the software update.
• Select the 4 firmware files in Samsung Odin flash tool.
• Use Samsung Odin flasher.
• Put your Galaxy tablet into Download Mode (Also known as Samsung Odin Mode).
• Install the latest software (Firmware) update on your Galaxy tablet.

Samsung Galaxy Tab A 8.4 2020 Software Update Methods:

Fortunately, there is more than one method to update your Samsung Galaxy tablet. So if one of these methods does not work for you, You can try another one.

There are three methods to update the software version of the Galaxy Tab A 8.4 2020:

• Samsung Galaxy Tab A 8.4 2020 software update via FOTA.
• Samsung Galaxy Tab A 8.4 2020 software update via Samsung Smart Switch.
• Samsung Galaxy Tab A 8.4 2020 software update via Samsung Odin.

How To Update Samsung Galaxy Tab A 8.4 2020 software via FOTA:

In this software update method, You do not need to use any external tools or programs. All you need to perform this update method is a good WiFi connection. The steps are elementary. All You have to do is reading the Samsung FOTA update guide to update your device via FOTA.

How To Update Samsung Galaxy Tab A 8.4 2020 software via Samsung Smart Switch:

This update method is a little bit different, As you need a computer to update your Samsung Galaxy tablet. But it is also a simple process and does not require any experience. If you want to try this method, Then read the Smart Switch update guide and follow the steps one by one and you will make it.

How To Update Samsung Galaxy Tab A 8.4 2020 software via Samsung Odin:

Indeed I recommended this update method if the other two ones have failed. To update the Galaxy device via Samsung Odin flash tool, You need a computer, Samsung Firmware package, Samsung Odin flasher, Samsung USB drivers, And a USB cable.

In case you do not know how or where to get the Samsung firmware package, Then here is a complete guide on How to download Samsung firmwares.

Tips:

• Make sure to download a newer firmware version from the one installed on your Samsung device.
• Check your Samsung Galaxy Tab A 8.4 2020 model number (It looks like SM-T307U, …). And download only the corresponding firmware files. You can check your device model number from Settings > About Device > Model Number.

Samsung Galaxy Tab A 8.4 2020 Software Update Checklist:

• Download and install the Samsung USB driver for mobile phones on your computer.
• Download and extract the Samsung Odin flash tool (on your computer).
• Extract the Samsung firmware package (on your computer).
• Check the battery level of your Samsung device. Charge it if it is lower than 50%.
• Make sure you know the Google account name and password. And any other Email accounts info, Samsung accounts info…etc.
• Backup any wanted data before updating your device’s firmware (Use the Samsung Smart Switch software to backup all your relevant information).

Tip: Sometimes there are two CSC files inside the Samsung firmware package.
If you are installing firmware with the same country code (Or carrier) like your device already has, Then select the HOME_CSC_xxx file in the CSC field (This one will keep your apps and data). But in case you are installing firmware with a different country code (Or carrier) then select the CSC_xxx file instead.

Samsung Galaxy Tab A 8.4 2020 Software Update Step by Step:

1- Run Samsung Odin flasher as Administrator.

2- Click on the Options tab.

3- Make sure the Auto Reboot, F.Reset Time options are checked.

4- Select the 4 firmware files:

• Click on the BL button and select the file starts with BL_xxxx.
• Click on the AP button and select the file starts with AP_xxxx.
• Click on the CP button and select the file starts with CP_xxxx. (LTE variant only)
• Click on the CSC button and select the file starts with HOME_CSC_xxx or CSC_xxx.

5- Turn Off your Galaxy device, And wait for 10 seconds.

6- Connect the USB cable to the computer. It is better to use the original USB cable you got with your Samsung device.

7- Put the device into the Download Mode:

• Press and hold the Volume Up + Volume Down buttons. Then, Insert the USB cable (Must be connected to the PC).
• When the Warning screen appears, Release the buttons.
• Press the Volume Up button to enter Odin Mode (Download Mode).

8- When the computer detects the newly connected device completely, You will see the COM port number of your device at the Odin window (0:[COMxx]).

9- Click on the Start button. Odin flasher will start installing the new firmware files on your Galaxy tablet, And reboot it when finishing.

10- Wait until you see PASS! Word at Odin program’s window. That means the update was successful. You can disconnect your Galaxy device from the computer.

11- After your Galaxy device is entirely on, Select your preferred device language. Then, Follow the on-screen instructions to proceed with the initial setup.

12- Done, You have updated the software version of your Samsung Galaxy Tab A 8.4 2020.

Did you use this guide to update your Samsung Galaxy Tablet?

Which method did you use?

Share your experience in the comments below.

The post How To Update The Samsung Galaxy Tab A 8.4 2020 Software appeared first on Tsar3000.

There are two methods to factory reset the Samsung Galaxy Tab A 8.4 2020, and We listed them below in details. Also, you can learn how to wipe cache partition, and soft reset your Samsung tablet.

Before resetting your tablet, read our guide on how to prepare your Samsung Galaxy device for a factory reset.

If You have already reset your Galaxy Tab A 8.4 and can’t bypass the Factory Reset Protection (FRP Lock), Then read our guide on How to Unlock Samsung FRP Lock Here.

How To Factory Reset the Samsung Galaxy Tab A 8.4 2020 from Settings Menu:

Step 1: Tap Settings icon from the home screen.

Step 2: Tap on General management.

Step 3: Tap Reset.

Step 4: Tap Factory Data Reset:
At this point, the Android OS will tell you that all data will be erased from your tablet. Including your Google account, System and app data, Settings, Downloaded app, Music, Pictures, And all other user data, So make sure to back up anything you need before moving to the next steps.

Step 5: Tap Reset:
Once again the tablet will remind you, That all your personal information and downloaded apps will be erased and can’t be recovered.

Step 6: If the device asks for any password, PIN code, Or pattern, Then enter it and tap on Continue.

Step 7: Tap Delete all. Then, Wait for the Factory data reset process to be completed. The device will reboot.

Step 8: Done, Now when your Galaxy Tab A 8.4 is fully on, Select your preferred device language, And follow the on-screen instructions to proceed with the initial setup.

How To Factory Reset the Samsung Galaxy Tab A 8.4 2020 from Recovery Menu:

How To Wipe Cache Partition on the Samsung Galaxy Tab A 8.4 2020:

Clearing the cache partition of your Galaxy device will not delete your data (Contacts, SMS, Photos, Videos,… Etc). It will remove the temporary system data which is useful to make the system run more smoothly. It is recommended to wipe the cache partition after installing a new system update.

To wipe the cache partition follow the same steps like (Factory Reset Samsung Galaxy Tab A 8.4 from Recovery Menu). But instead of selecting the Wipe Data/Factory Reset option, You should choose the Wipe Cache Partition option.

How To Soft Reset the Samsung Galaxy Tab A 8.4 2020:

The Soft Reset means turning your device off and on again. Like Wipe Cache Partition, This operation will not delete your data.

If your Galaxy Tab A 8.4 screen is frozen or unresponsive, Then, This operation may fix it:

1. Ensure your device battery has more than 5% of power. If no, Then charge your device first.
2. Press and hold the Volume Down button + the Power button.
3. Keep holding the two buttons until the device vibrates, and the Samsung logo appears on the screen. Then release the both buttons.
4. Wait for the device to be fully on and check if your problem still exists, Or you have fixed it.

The post How To Factory Reset The Samsung Galaxy Tab A 8.4 2020 appeared first on Tsar3000.

How To Take A Screenshot on Samsung Galaxy Tab A 8.4 2020 using its Hardware buttons:

Notices:

• The resolution of the captured screenshots is the same as your Samsung device screen resolution. The Samsung Galaxy Tab A 8.4 2020 has WUXGA display with 1920 x 1200 pixels resolution.
• You can edit the screenshot photos the same way you do with any other photos and images.
• You can not hide the Screenshots album (folder) because it is created by default like the Camera album.

The post How To Take A Screenshot On Samsung Galaxy Tab A 8.4 2020 appeared first on Tsar3000.