How To Update Samsung Galaxy Win Duos GT-I8552 Software

To Update Samsung Galaxy Win Duos GT-I8552 Software you need to install a newer firmware version on it. You can update your Samsung Galaxy Win Duos GT-I8552 without a computer by going to Settings > About Device > Software Update. Also, You can update this Samsung device manually, But you need to use a computer.

In this Guide, You will learn how to update Samsung Galaxy Win Duos GT-I8552 manually by using the Odin3 flash tool and Samsung Stock Firmware files.

Samsung Galaxy Win Duos GT-I8552 Update Check List:

1- The Software Update process will wipe all your data, So backup all the wanted data (Contacts, SMS, Photos, Videos,… Etc).

2- Make sure that you know all the emails and passwords you use on this device.

3- Ensure your Samsung Galaxy device has enough charge level (50% at least).

4- Download Odin flasher and extract it to a known location on your computer.

5- Download the suitable Samsung Firmware package for your Galaxy Win Duos GT-I8552.

6- Extract the Downloaded Samsung Firmware package to a known location on your computer.

7- Download and Install Samsung USB Driver for Mobile phones.

Update Samsung Galaxy Win Duos GT-I8552 Software (Step by Step):

1- Run Odin3.exe program as Administrator.

2- Make sure these options are checked: Auto Reboot, F.Reset Time.

3- If you want to flash PIT file then check Re-Partition option. Otherwise leave it unchecked.

4- Click on PIT button and select: DELOS_8G_0328.pit (Only if you checked Re-Partition option).

5- Click on Bootloader button and select: BOOTLOADER_I8552XXAMD8_1108001_REV00_user_low_ship.tar.md5

6- Click on PDA button and select: CODE_I8552XXAMD8_1108001_REV00_user_low_ship.tar.md5

7- Click on PHONE button and select: MODEM_I8552XXAMD6_1108001_REV00_user_low_ship.tar.md5

8- Click on CSC button and select: CSC_OXE_I8552OXEAMD1_1103757_REV00_user_low_ship.tar.md5

9- Turn Off your Galaxy Win and put it into Download Mode ( Press Volume Down + Home then Power button).

10- After you see the Warning message press the Volume Up button.

11- Use the USB cable to connect it to the computer.

12- Wait until the computer detects the newly connected device completely and installs the needed drivers for it.

13- You should see the COM port number of your device at Odin3 window (0:[COMxx]).

14- Click on the Start button to let Odin3 flasher install the new firmware files on your Galaxy Win Duos.

15- The installing process will take several minutes, And when it is done, The Odin3 flasher will reboot your Galaxy device.

16- Look at Odin3 window, If you see PASS! Word at Odin3 program’s window, That means the update was done successfully.

17- Disconnect the USB cable.

18- When your Galaxy Win Duos is fully on select your preferred device language and follow the on-screen instructions to proceed with the initial setup.

19- Done, You have updated the software version of your Samsung Galaxy Win Duos GT-I8552.

Notice: In case you extracted the Samsung Firmware Package and you got one big file only, Then select it as PDA file.