Now Reading
How To Update Samsung Galaxy Grand Duos GT-I9082 Software

How To Update Samsung Galaxy Grand Duos GT-I9082 Software

by TsarFebruary 27, 2024

To Update Samsung Galaxy Grand Duos GT-I9082 Software you need to install a newer firmware version on it. You can update your Samsung Galaxy Grand Duos GT-I9082 without a computer by going to Settings > About Device > Software Update. Also, You can update this Samsung device manually, But you need to use a computer.

In this Guide, You will learn how to update Samsung Galaxy Grand Duos GT-I9082 manually by using the Odin3 flasher and Samsung Stock Firmware files.

Samsung Galaxy Grand Duos GT-I9082 Update Check List:

1- The Software Update process will wipe all your data, So backup all the wanted data (Contacts, SMS, Photos, Videos,… Etc).

2- Make sure that you know all the emails and passwords you use on this device.

3- Ensure your Samsung Galaxy device has enough charge level (50% at least).

4- Download Odin flasher and extract it to a known location on your computer.

5- Download the suitable Samsung Firmware package for your Galaxy Grand Duos GT-I9082.

6- Extract the Downloaded Samsung Firmware package to a known location on your computer.

7- Download and Install Samsung USB Driver for Mobile phones.


Update Samsung Galaxy Grand Duos GT-I9082 Software (Step by Step):

1- Run Odin3.exe program as Administrator.

2- Make sure these options are checked: Auto Reboot, F.Reset Time.

3- If you want to flash PIT file then check Re-Partition option, Otherwise leave it unchecked.

4- Click on PIT button and select: baffin.pit (Only if Re-Partition option is checked).

5- Click on Bootloader button and select: BOOT_I9082XXUBMF2_REV05.tar.md5

6- Click on PDA button and select: CODE_I9082XXUBMF2_871997_REV05_user_mid_noship.tar.md5

7- Click on PHONE button and select: MODEM_I9082XXUBMF2_REV05.tar.md5

8- Click on CSC button and select: CSC_OXA_I9082OXABMF2_871997_REV05_user_mid_noship.tar.md5

9- Turn Off your Galaxy Grand Duos and put it into Download Mode ( Press Volume Down + Home then Power button).

10- After you see the Warning message press the Volume Up button.

Samsung GT-i9082 Galaxy Grand Duos Buttons

11- Use the USB cable to connect it to the computer.

12- Wait until the computer detects the newly connected device completely and installs the needed drivers for it.

13- You should see the COM port number of your device at Odin3 window (0:[COMxx]).

14- Click on the Start button to let Odin3 flasher install the new firmware files on your Galaxy Grand Duos.

15- The installing process will take several minutes, And when it is done, The Odin3 flasher will reboot your Galaxy device.

16- Look at Odin3 window, If you see PASS! Word at Odin3 program’s window, That means the update was done successfully.

17- Disconnect the USB cable.

18- When your Galaxy Grand Duos is fully on select your preferred device language and follow the on-screen instructions to proceed with the initial setup.

19- Done, You have updated the software version of your Samsung Galaxy Grand Duos GT-I9082.


Notice: In case you extracted the Samsung Firmware Package and you got one big file only, Then select it as PDA file.


Leave a Response